Media Summary: A demonstration on how to use the sweep tool to create a protusion. This is a video that covers alot of modeling techniques. Construction geometry is used to create sketches that form slots. The slots ... In this step a second part is added to the assembly and using the Automatic constraints it is fully constrained with respect to the ...
Pro E Tutorial 15 Tcnj - Detailed Analysis & Overview
A demonstration on how to use the sweep tool to create a protusion. This is a video that covers alot of modeling techniques. Construction geometry is used to create sketches that form slots. The slots ... In this step a second part is added to the assembly and using the Automatic constraints it is fully constrained with respect to the ... Creation of a part that requires the use of reference geometry. datum planes are created by both selecting two edges and by ... In this fifth step a 24 tooth gear is added to the axle that can rotate using the pin constraint. The gear is -fully- constrained with ... In this step the assembly is switched to mechanism application and a gear-pair relationship is created between the 24-tooth and ...
In this step a second rotating axle is added and an 8-tooth gear is place on the new axel and positioned such that is meshes with ... In this step a third item is added to the assembly. The constraints are placed by accessing the placement tab. The part is fully ... Simple Extrusion with three features created with the extrude tool. Steps on how to bring the initial part into an assembly and fully constrain it with respect to the assembly coordinate system. This video shows the creation of a part that requires the use of sketches that must be created on a set of orthogonal planes. In this step an axle is added to the assembly. The axle is placed using the Pin constraint set that provides a means to locate the ...
The final step is to add a -servo- motor to the axle that contains the 24-tooth gear. The rotation rate of the motor is specified and ...
